
Machinery
Laser cutting of sheet metal
There are several laser cutting machines offering 15,000 W of laser power for a court pressure.
The laser cutting process is a thermal cutoff at which the laser beam serves as a useful. The width of the slot cut is very low and is kept constant. The tolerances are + -0.1 and the high-speed machining, enabling mass production. The cut leaves no burr and the roughness of the edges of cut is reduced, making it unnecessary to further treatment. The small area of influence ensures the thermal deformation of the part, if any, is minimal.
Veneer usual formats are 3000x1500, 4000x2000. Thicknesses between 0.5mm and 25mm. Materials usual carbon steels are under construction or for tools (DD11, S235, S275, S355, resistant sheet, domex, high elastic limit, and so on.) Carbon steel with surface treatment (galvanized sheet, plate Zincor / zinc), Steel the stainless CrNi (AISI-304, AISI-316 with different finishes 2B, 1D, satin, grinding, polishing), aluminum (5083, 5754), titanium.